Dell EMC OpenManage SNMP Reference Guide Version 9.1

PDF

System Resource Group Variable Values

This section includes definitions for server administrator-specific variable values used in this section.

Table 1. System Resource Map Type. This table lists the System Resource Map Type
Variable Name: `DellSystemResourceMapType`
Data Type: `Integer`
Possible Data Values	Meaning of Data Value
`other(1)`	The system resource map type is not one of the following:
`unknown(2)`	The system resource map type is unknown (not known or not monitored).
`typeOne(3)`	The system resource map is type 1 (one).

Table 2. Resource Owner Interface Type. This table lists the Resource Owner Interface Type
Variable Name: `DellResourceOwnerInterfaceType`
Data Type: `Integer`
Possible Data Values	Meaning of Data Value
`typeIsOther(1)`	The interface type is not one of the following:
`typeIsUnknown(2)`	The interface type is unknown.
`typeIsInternal(3)`	The interface type is internal.
`typeIsISA(4)`	The interface type is an Industry Standard Architecture (ISA) bus.
`typeIsEISA(5)`	The interface type is an Extended Industry Standard Architecture (EISA) bus.
`typeIsMCA(6)`	The interface type is a microchannel architecture (MCA) bus.
`typeIsTurboChannel(7)`	The interface type is a turbo-channel bus.

Table 3. Resource Share Disposition. This table lists the Resource Share Disposition
Variable Name: `DellResourceShareDisposition`
Data Type: `Integer`
Possible Data Values	Meaning of Data Value
`shareIsOther(1)`	The share disposition is not one of the following:
`shareIsUnknown(2)`	The share disposition is unknown (not known or not monitored).
`shareIsDeviceExclusive(3)`	The share disposition is device exclusive.
`shareIsDriverExclusive(4)`	The share disposition is driver exclusive.
`shareIsShared(5)`	The share disposition is shared.

Table 4. Resource Memory Flags. This table lists the Resource Memory Flags
Variable Name: `DellResourceMemoryFlags`
Data Type: `Integer`
Possible Data Values	Meaning of Data Value
`memoryIsReadOnly(1)`	The resource memory is read-only.
`memoryIsWriteOnly(2)`	The resource memory is write-only.
`memoryIsPreFetchable(4)`	The resource memory is prefetchable.
`memoryIsCombinedWritable(8)`	The resource memory is read-write.
`memoryIsF24(16)`	The resource memory is F24.

Table 5. Resource Interrupt Type. This table lists the Resource Interrupt Type
Variable Name: `DellResourceInterruptType`
Data Type: `Integer`
Possible Data Values	Meaning of Data Value
`interruptIsLevelSensitive(1)`	The interrupt type is level sensitive.
`interruptIsLatched(2)`	The interrupt type is latched.

Table 6. Resource Interrupt Trigger. This table lists the Resource Interrupt Trigger
Variable Name: `DellResourceInterruptTrigger`
Data Type: `Integer`
Possible Data Values	Meaning of Data Value
`interruptIsActiveWhenLow(1)`	The interrupt trigger is active on a low signal.
`interruptIsActiveWhenHigh(2)`	The interrupt trigger is active on a high signal.

Table 7. Resource DMA Bus Master. This table lists the Resource DMA Bus Master
Variable Name: `DellResourceDMABusMaster`
Data Type: `Integer`
Possible Data Values	Meaning of Data Value
`dmaIsOther(1)`	The DMA bus master capability is not one of the following:
`dmaIsUnknown(2)`	The DMA bus master capability is unknown.
`dmaIsNotABusmaster(3)`	The DMA does not have bus master capability.

Table 8. Resource DMA Transfer Width. This table lists the Resource DMA Transfer Width
Variable Name: `DellResourceDMATransferWidth`
Data Type: `Integer`
Possible Data Values	Meaning of Data Value
`dmaTransferWidthIsOther(1)`	The DMA transfer width is not one of the following:
`dmaTransferWidthIsunknown(2)`	The DMA transfer width is unknown.
`dmaTransferWidthIs8Bits(3)`	The DMA transfer width is 8 bits.
`dmaTransferWidthIs16Bits(4)`	The DMA transfer width is 16 bits.
`dmaTransferWidthIs32Bits(5)`	The DMA transfer width is 32 bits.
`dmaTransferWidthIs64Bits(6)`	The DMA transfer width is 64 bits.
`dmaTransferWidthIs128Bits(7)`	The DMA transfer width is 128 bits.